SLEU063
TVP5160EVM User’s Guide
11
6
Software Installation
WinVCC4 is a Windows application that uses the PC parallel port to emulate I
2
C, providing
access to each device on the I
2
C bus. WinVCC4 makes use of CMD files, a text editable file
that allows preset video setups to be programmed easily.
This feature allows the user to easily set multiple I
2
C registers with the press of a button.
WinVCC4 also has “Property Sheets” for the TVP5160 which allows the user to control the I
2
C
registers with a GUI.
All necessary software for the TVP5160EVM is provided on the enclosed CD. The following
provides the steps required to install WinVCC4:
1. Insert the provided TVP5160EVM CD.
2. Install Port95NT.exe. This is the parallel port driver used by WinVCC4. This driver
must be installed and the PC must be rebooted before WinVCC4 will operate correctly.
3. Install Setup.exe. Click
Next
at all prompts and click
Finish
to complete the installation
process. This will install WinVCC4 onto the PC. No reboot is required.
4. Run WinVCC4.exe
NOTE
: A shortcut to WinVCC4 should now be available on the desktop. WinVCC4 and
additional TVP5160 related documentation can also be found at
Start->Programs->
TVP5160EVM Software
.
