SLEU063
20
TVP5160EVM User’s Guide
8.5.1 System Initialization
Clicking
System Initialization
in the
Tools
menu displays the dialog shown below. This provides
the means for initializing the video decoder and/or video encoder for a particular video mode.
The details of the initialization are contained in the command file (with a CMD file extension).
The command file is loaded using the
Browse
… button. Once the command file is opened, a
text list displays descriptions of the individual data sets contained within the command file.
Click once on the desired data set description to select it. Click the
Program Device(s) Using
Selected Dataset
button to run the selected data set, which loads the devices via the I
2
C bus.
When the device initialization has completed, the status indicator reads
Ready
.
NOTE
: If
Ready
does not display, then the devices are not initialized and the I
2
C bus is not
communicating. See Section 9,
Troubleshooting
, for possible solutions.
Click the
Close
button to close the dialog box. Each time the
System Initialization
dialog is
closed, the initialization file pathname and the data set selection number are saved in the
Windows™ registry to allow these settings to be retained for the next time
WinVCC4
runs.
Figure 12. System Initialization
