Texas Instruments TravelMate 3000 User Manual Download

Page: 155 / 204

Restoring MS-DOS System Files

When the A> prompt is displayed, remove the SHELL floppy and insert
the Select Copy floppy, and type

SYS C:

and press the Enter key. The computer should display the message

System transferred

and then display the A> prompt.

At the A> prompt type

COPY COMMAND.COM C:\DOS

and press the Enter key. The computer should display the message

1 File(s) copied

and then display the A> prompt.

Note: If the computer displays an error message such as "Sector not found error reading
(or writing) drive X," you may have a problem with the hard disk chive or the floppy
drive.

Remove the Select Copy floppy from the floppy drive.

6 .

Press the Ctrl-Alt-Del keys. The computer should restart (reboot)
normally.

Troubleshooting E- 11

Summary of Contents for TravelMate 3000













































































































































































































Search results

Summary of Contents for TravelMate 3000

Reviews:

Related manuals for TravelMate 3000

Brands by name

Popular brands

Texas Instruments TravelMate 3000, User Manual

Search results

Summary of Contents for TravelMate 3000

Reviews:

Related manuals for TravelMate 3000

Brands by name

Popular brands