Click
Yes >
to run the updater. The LPP Updater will run and once finished will ask if you would like to re-launch
the GUI applications.
Figure 5-24. Setup Screen 5
Click
Yes >
to re-launch GUI.
A window appears indicating the the
must be changed from bootloader mode to normal
mode. This is accomplished by removing the shorting jumper from J15 then pressing the "RESET_SW1" switch
and wait 3 seconds to ensure device drivers reload, see
.
Figure 5-25. Setup Screen 6
Software
32
TPS92520EVM-133 Dual 1.6-A Synchronous Buck LED Driver Evaluation
Module
SLUUCC4 – OCTOBER 2020
Copyright © 2020 Texas Instruments Incorporated
