Texas Instruments TPS25921XEVM-637, User Manual

Page: 5 / 20

www.ti.com
General Configurations
4 General Configurations
This section describes the physical access, test equipment and set up, and the test setup and procedures
for this EVM.
4.1 Physical Access
Table 2 lists the TPS25921XEVM-637 input and output connector functionality.
Table 2. Input and Output Connector Functionality
Connector Label Description
J1 CH1 VIN1(+), GND(–) CH1 Input power supply to the EVM
J2 VOUT1(+),GND(–) CH1 Output power from the EVM
J5 CH2 VIN2(+), GND(–) CH2 Input power supply to the EVM
J6 VOUT2(+),GND(–) CH2 Output power from the EVM
Table 3 describes the test point availability.
Table 3. Test Points Description
Channel Test Points Label Description
CH1 TP6 VIN1 CH1 Input power supply to the EVM
TP3 EN1 CH1 Active high enable and under voltage input
TP22 OVP1 CH1, Active high overvoltage input
TP10 IMON1 CH1 Current monitor. Load current
≈
1 × voltage on TP10
TP5 VOUT1 CH1 Output from the EVM
TP4 FLTb1 CH1, Fault test point
TP1 GND GND
TP2 GND GND
TP7 GND GND
TP8 GND GND
CH2 TP19 VIN2 CH2 Input power supply to the EVM
TP16 EN2 CH2 Active high enable and under voltage input
TP23 OVP2 CH2, Active high overvoltage input
TP20 IMON2 CH2 Current monitor. Load current
≈
1 × voltage on TP20
TP18 VOUT2 CH2 Output from the EVM
TP20 FLTb2 CH2, Fault test point
TP11 GND GND
TP12 GND GND
TP13 GND GND
TP21 GND GND
5 SLUUB50 – August 2014 TPS25921X-637EVM: Evaluation Module for TPS25921X
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated