manualshive.com logo in svg

Texas Instruments TMS320C80, User Manual

Share
Download
Texas Instruments TMS320C80 User Manual Download Page 5

 How to Use This Manual

Preface

Read This First

About This Manual

The TMS320C80 and the TMS320C82 are the first two members
of the ’C8x family of high-performance DSP devices. This guide
explains how to port software developed for one of these devices
to the other. It also presents a set of software compatibility guide-
lines for developing software that will run on either device.

How to Use This Manual

This document contains three chapters that deal with different is-
sues related to compatibility:

-

Chapter 1 discusses software-related differences between
the ’C80 and the ’C82.

-

Chapter 2 discusses guidelines and techniques for develop-
ing software that can run on both the ’C80 and the ’C82.

-

Chapter 3 discusses guidelines and techniques for prototyp-
ing ’C82 software using a ’C80.

If you need background information about the differences be-
tween the ’C80 and the ’C82, read Chapter 1 before going on to
Chapter 2 and Chapter 3.

If you already understand the differences between the ’C80 and
the ’C82, then you can go directly to Chapter 2 and use Chapter 1
as reference material.

This user’s guide contains information at a general level to guide
you in completing programs. It does not discuss all issues related
to the ’C80 and the ’C82; use your best judgement in applying the
methods discussed in Chapter 2 and Chapter 3 to your applica-
tion.

Summary of Contents for TMS320C80

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands