Texas Instruments TMS320 Series User Manual Download

Page: 7 / 288

vii

This is a draft version printed from file: ugtoc.fm on 4/20/09

Contents

About DSP/BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1

DSP/BIOS is a scalable real-time kernel. It is designed to be used by applications that require real-
time scheduling and synchronization, host-to-target communication, or real-time instrumentation.
DSP/BIOS provides preemptive multi-threading, hardware abstraction, real-time analysis, and
configuration tools.

1.1

DSP/BIOS Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

1.2

DSP/BIOS Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

1.3

Naming Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9

1.4

For More Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Program Generation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1

This chapter describes the process of generating programs with DSP/BIOS. It also explains which
files are generated by DSP/BIOS components and how they are used.

2.1

Creating and Building a CCSv4 Project for DSP/BIOS Applications . . . . . . . . . . . . . . .2-2

2.2

Converting CCSv3.3 Projects to CCSv4 Projects . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10

2.3

Configuring DSP/BIOS Applications Statically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-11

2.4

Creating DSP/BIOS Objects Dynamically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-16

2.5

Files Used to Create DSP/BIOS Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18

2.6

Using Makefiles to Build Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20

2.7

Using DSP/BIOS with the Run-Time Support Library. . . . . . . . . . . . . . . . . . . . . . . . . .2-22

2.8

DSP/BIOS Startup Sequence. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-24

2.9

Using C++ with DSP/BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28

2.10

User Functions Called by DSP/BIOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31

2.11

Calling DSP/BIOS APIs from Main . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-32

Instrumentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1

DSP/BIOS provides both explicit and implicit ways to perform real-time program analysis. These
mechanisms are designed to have minimal impact on the application’s real-time performance.

3.1

An Overview of Real-Time Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-2

3.2

Real-Time Analysis Tools in CCStudio v4.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-3

3.3

Runtime Object Viewer (ROV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-10

3.4

Instrumentation Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-15

3.5

Instrumentation APIs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-18

3.6

Implicit DSP/BIOS Instrumentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-29

3.7

Instrumentation for Field Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-38

Summary of Contents for TMS320 Series

































































































































































































































































































Search results

Summary of Contents for TMS320 Series

Reviews:

Related manuals for TMS320 Series

Brands by name

Popular brands

Texas Instruments TMS320 Series, User Manual

Search results

Summary of Contents for TMS320 Series

Reviews:

Related manuals for TMS320 Series

Brands by name

Popular brands