Texas Instruments TM5000 Series User Manual Download Page 104

Page: 104 / 117

Startup Error Messages

Diskette drive 0
failure

Press

Ctrl-Alt-Esc

to ensure that the

drive type is set correctly in Setup
(should be 3.5 inch, 1.44 MB).

Diskette read
failure - press F1 to
retry boot

Floppy defective or unformatted; insert a
different floppy and press

Fixed disk failure

Turn the computer off; wait several
seconds; then turn the computer on
again.
Press

Ctrl-Alt-Esc

to ensure hard disk

type is correct in Setup (should be the
default for the internal hard disk).

Fixed disk read
failure - press F1 to
retry boot

Press

Ctrl-Alt-Esc

to ensure hard disk

type is correct in Setup (should be the
default for the internal hard disk).

Invalid
Configuration
Information

Defaults in Setup may have changed.
Enter Setup and press

Esc-F5

to reset

defaults. Then press

Esc-F4

to save

and reboot.
Battery that maintains configuration
has failed; follow procedure in this
chapter to restore configuration.

Keyboard
clock/data line
failure

Ensure external keyboard connected
correctly.
Replace external keyboard.

Keyboard stuck
key failure

Press jammed key to unstick it
Ensure no keys pressed during
computer startup.

Missing operating
system

Press

Ctrl-Alt-Esc

to ensure the hard

disk is defined correctly in Setup.
Reboot using the System Files Recovery
diskette.

Startup Error Messages

7-4

Summary of Contents for TM5000 Series






















































































































Search results

Summary of Contents for TM5000 Series

Reviews:

Brands by name

Popular brands

Texas Instruments TM5000 Series, User Manual

Search results

Summary of Contents for TM5000 Series

Reviews:

Brands by name

Popular brands