Texas Instruments TLC6C5712-Q1, User Manual

Page: 9 / 21

www.ti.com
GUI Function
The PWM0, PWM1, and PWM2 fields generate the PWM control signals for the TLC6C5712-Q1 EVM.
PWM0, PWM1, and PWM2 corresponds with the PWM0, PWM1, and PWM2 inputs of the TLC6C5712-Q1
device. Users can select from the following 8 frequencies: 100 Hz, 200 Hz, 500 Hz, 1 KHz, 2 KHz, 5 KHz,
10 KHz, 20 KHz, 50 KHz, and 100 KHz. The duty cycles can also be changed from 0 to 100%
respectively.
Figure 6. General Function II
Figure 7 shows the status registers and fault registers of the TLC6C5712-Q1 device. By clicking the Read
All button, the information of these registers is read out. A red indicator color indicates a fault.
Figure 7. General Function III
Figure 8 contains registers with simple read and write functions. Users can write and read registers by
input address and data value. The ERROR indicator shows the ERR pin state. If the error pin is pulled
low, the ERROR indicator displays red. The left side of
Figure 8 shows several special commands of
TLC6C5712-Q1 device which can be found in the datasheet ( SLVSCO9 ).
9 SLVUAE6A – January 2015 – Revised July 2015 TLC6C5712-Q1 Evaluation Module
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated