Texas Instruments THS3062EVM, User Manual, Page: 6 / 21

Trademarks
iv
FCC Warning
This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.
This EVM contains components that can potentially be damaged by
electrostatic discharge. Always transport and store the EVM in its
supplied ESD bag when not in use. Handle using an antistatic
wristband. Operate on an antistatic work surface. For more
information on proper handling, refer to SSYA008.
Related Documentation From Texas Instruments
The URL’s below are correct as of the date of publication of this manual. Texas
Instruments applications apologizes if they change over time.
-
THS3062 data sheet (SLOS394)
-
Application report (SLOA069), How (Not) to Decouple High Speed Op
Amp Circuits, http://www-s.ti.com/sc/psheets/sloa069/sloa069.pdf
-
Application report (SLMA002), PowerPAD Thermally Enhanced Package,
http://www-s.ti.com/sc/psheets/slma004/slma002.pdf
-
Application report (SLMA004), PowerPAD Made Easy,
http://www-s.ti.com/sc/psheets/slma004/slma004.pdf
-
Application report (SSYA008), Electrostatic Discharge (ESD),
http://www-s.ti.com/sc/psheets/ssya008/ssya008.pdf
-
High-Speed Amplifier PCB Layout Tips,
http://www-s.ti.com/sc/psheets/sloa102/sloa102.pdf
Trademarks
PowerPAD is a trademark of Texas Instruments.