Texas Instruments THS3062EVM, User Manual, Page: 13 / 21

2-1 Using the THS3062EVM
Using the THS3062EVM
This chapter shows how to connect the THS3062EVM to test equipment. It is
recommended that the user connect the EVM as described in this chapter to
avoid damage to the EVM or the THS3062 installed on the board. Figure 2.1
shows how to connect power supplies, a 50-
Ω
signal source, and a 50-
Ω
monitoring instrument.
Figure 2-1. THS3062EVM Interconnection Diagram
Figure 2-1 shows the connections to measure the output of output 1 while a
signal is inserted into EVM channel 1’s noninverting input. The signal source
can instead be connected to J2 for an inverting signal path. If the oscilloscope
input is connected to J6 and the signal source is connected to J5, EVM channel
2 is also configured for a noninverting signal path.
Chapter 2