Stellaris® LM3S9B96 Development Kit User’s Manual
September 5, 2010
73
4.
Use a slight pressure to seat the EM module firmly on the EM2 expansion board. See
Figure G-6 on page 73 for fully assembled DK-LM3S9B96 board with EM2 expansion board
and wireless EM module.
Figure G-6. Fully Assembled DK-LM3S9B96 Board with EM2 Expansion Board and Wireless EM
Module
Follow these same steps for installing a second module into the secondary EM header location
which will be oriented 180 degrees from the primary EM header location.
NOTE: The secondary EM header should only be used when two EM modules are installed in the
system or when specifically indicated in the EM module’s README First document.
EM2 expansion board
EM module
Antenna for EM module
DK-LM3S9B96 board
Summary of Contents for Stellaris LM3S9B96
