Texas Instruments Sitara AM3352 Manual Download Page 236 | Manualshive

Page: 236 / 253

background image

236

AM3359, AM3358, AM3357, AM3356, AM3354, AM3352, AM3351

SPRS717J – OCTOBER 2011 – REVISED APRIL 2016

Submit Documentation Feedback

Product Folder Links:

AM3359 AM3358 AM3357 AM3356 AM3354 AM3352 AM3351

Device and Documentation Support

Copyright © 2011–2016, Texas Instruments Incorporated

8

Device and Documentation Support

8.1

Device Nomenclature

To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all
microprocessors (MPUs) and support tools. Each device has one of three prefixes: X, P, or null (no prefix)
(for example, XAM3358AZCE). Texas Instruments recommends two of three possible prefix designators
for its support tools: TMDX and TMDS. These prefixes represent evolutionary stages of product
development from engineering prototypes (TMDX) through fully qualified production devices and tools
(TMDS).

Device development evolutionary flow:

X

Experimental device that is not necessarily representative of the final device's electrical
specifications and may not use production assembly flow.

P

Prototype device that is not necessarily the final silicon die and may not necessarily meet
final electrical specifications.

null

Production version of the silicon die that is fully qualified.

Support tool development evolutionary flow:

TMDX

Development-support product that has not yet completed Texas Instruments internal
qualification testing.

TMDS

Fully-qualified development-support product.

X and P devices and TMDX development-support tools are shipped against the following disclaimer:

"Developmental product is intended for internal evaluation purposes."

Production devices and TMDS development-support tools have been characterized fully, and the quality
and reliability of the device have been demonstrated fully. TI's standard warranty applies.

Predictions show that prototype devices (X or P) have a greater failure rate than the standard production
devices. Texas Instruments recommends that these devices not be used in any production system
because their expected end-use failure rate still is undefined. Only qualified production devices are to be
used.

TI device nomenclature also includes a suffix with the device family name. This suffix indicates the
package type (for example, ZCE), the temperature range (for example, blank is the default commercial
temperature range), and the device speed range, in megahertz (for example, 27 is 275 MHz).

provides a legend for reading the complete device name for any AM335x device.

For orderable part numbers of AM335x devices in the ZCE and ZCZ package types, see the Package
Option Addendum of this document,

, or contact your TI sales representative.

For additional description of the device nomenclature markings on the die, see the

AM335x ARM Cortex-

A8 Microprocessors (MPUs) Silicon Errata

.

«
...
234
235
236
237
238
...
»

Summary of Contents for Sitara AM3352






























































































































































































































































Reviews:

No comments

Related manuals for Sitara AM3352

Brand: Cabletron Systems Pages: 21

Brand: Harman Kardon Pages: 66

Brand: Dahua Pages: 24

F-ZTAT H8/3048 Series

Brand: Renesas Pages: 34

Compact Emulator M30620T-CPE

Brand: Renesas Pages: 52

Brand: Mitsubishi Pages: 874

Brand: Mellanox Technologies Pages: 57

Storage Networking (Unified Fabric Pilot)

Brand: Qlogic Pages: 76

Slideaway CL1008

Brand: ATEN Pages: 77

NVR41-4KS2 Series

Brand: Dahua Pages: 452

Brand: PairGain Pages: 80

Brand: ATTO Technology Pages: 2

ELITE LCD UPGRADE KIT

Brand: Corsair Pages: 11

-K6-2/450 - MHz Processor

Brand: AMD Pages: 98

Brand: NUROTRON Pages: 16

Brand: Abus Pages: 98

X-NUCLEO-AMICAM1

Brand: ST Pages: 18

Compressor DW-CP04

Brand: Digital Watchdog Pages: 73

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands