Texas Instruments SimpleLink CC2650, Manual

Page: 15 / 71

15
CC2650
www.ti.com SWRS158B – FEBRUARY 2015 – REVISED JULY 2016
Submit Documentation Feedback
Product Folder Links: CC2650
Specifications
Copyright © 2015–2016, Texas Instruments Incorporated
(1) Numbers given as I/C dB.
(2) X / Y, where X is +N MHz and Y is –N MHz.
(3) Excluding one exception at F
wanted
/ 2, per Bluetooth Specification.
5.6 1-Mbps GFSK (Bluetooth low energy Technology) – RX
Measured on the TI CC2650EM-5XD reference design with T
c
= 25°C, V
DDS
= 3.0 V, f
RF
= 2440 MHz, unless otherwise noted.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Receiver sensitivity
Differential mode. Measured at the CC2650EM-5XD
SMA connector, BER = 10
–3
–97 dBm
Receiver sensitivity
Single-ended mode. Measured on CC2650EM-4XS,
at the SMA connector, BER = 10
–3
–96 dBm
Receiver saturation
Differential mode. Measured at the CC2650EM-5XD
SMA connector, BER = 10
–3
4 dBm
Receiver saturation
Single-ended mode. Measured on CC2650EM-4XS,
at the SMA connector, BER = 10
–3
0 dBm
Frequency error tolerance
Difference between the incoming carrier frequency
and the internally generated carrier frequency
–350 350 kHz
Data rate error tolerance
Difference between incoming data rate and the
internally generated data rate
–750 750 ppm
Co-channel rejection
(1)
Wanted signal at –67 dBm, modulated interferer in
channel,
BER = 10
–3
–6 dB
Selectivity, ±1 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at
±1 MHz,
BER = 10
–3
7 / 3
(2)
dB
Selectivity, ±2 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at
±2 MHz,
BER = 10
–3
34 / 25
(2)
dB
Selectivity, ±3 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at
±3 MHz,
BER = 10
–3
38 / 26
(2)
dB
Selectivity, ±4 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at
±4 MHz,
BER = 10
–3
42 / 29
(2)
dB
Selectivity, ±5 MHz or more
(1)
Wanted signal at –67 dBm, modulated interferer at ≥
±5 MHz, BER = 10
–3
32 dB
Selectivity, Image frequency
(1)
Wanted signal at –67 dBm, modulated interferer at
image frequency,
BER = 10
–3
25 dB
Selectivity, Image frequency
±1 MHz
(1)
Wanted signal at –67 dBm, modulated interferer at
±1 MHz from image frequency, BER = 10
–3
3 / 26
(2)
dB
Out-of-band blocking
(3)
30 MHz to 2000 MHz –20 dBm
Out-of-band blocking 2003 MHz to 2399 MHz –5 dBm
Out-of-band blocking 2484 MHz to 2997 MHz –8 dBm
Out-of-band blocking 3000 MHz to 12.75 GHz –8 dBm
Intermodulation
Wanted signal at 2402 MHz, –64 dBm. Two
interferers at 2405 and 2408 MHz respectively, at
the given power level
–34 dBm
Spurious emissions,
30 to 1000 MHz
Conducted measurement in a 50-
Ω
single-ended
load. Suitable for systems targeting compliance with
EN 300 328, EN 300 440 class 2, FCC CFR47, Part
15 and ARIB STD-T-66
–71 dBm
Spurious emissions,
1 to 12.75 GHz
Conducted measurement in a 50 Ω single-ended
load. Suitable for systems targeting compliance with
EN 300 328, EN 300 440 class 2, FCC CFR47, Part
15 and ARIB STD-T-66
–62 dBm
RSSI dynamic range 70 dB
RSSI accuracy ±4 dB