![background image](http://html.mh-extra.com/html/texas-instruments/ri-ru1-001a-00/ri-ru1-001a-00_reference-manual_1094518022.webp)
August 2001
Series 7000 Reader Reference Guide
22
Draft Document
FCC ID: A92RU1001A
4.1 FCC Part 15 Compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio technician for help.
Note:
This device complies with the limits for a Class B digital device,
pursuant to Part 15. The Class B limits help insure that this device
provides reasonable protection against harmful interference in
residential installations. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions in this manual, may cause
harmful interference to radio communications.
Note:
NO MODIFICATIONS: Modifications to this device shall not be
made without the written consent of Texas Instruments
Incorporated. Unauthorized modifications may void the authority
granted under Federal Communications Commission Rules
permitting the operation of this device.
Radio Frequency (RF) Exposure
In order for this device to comply with FCC-adopted RF exposure limits, precautions must be
taken. To meet the requirements of the FCC’s Maximum Permissible Exposure (MPE)
guidelines, persons should not be closure than 9 inches (23cm) to a transmitting antenna.
For installations where an operator must handle a tag or diagnostic tool closer than 9 inches to
the transmitting antenna, the operator should ensure that the RF antenna is not transmitting
prior to positioning the tag or tool closer than 9 inches to the transmitting antenna, the operator
should ensure that the RF antenna is not transmitting prior to positioning the tag or tool. Once
the operator has positioned the tag or diagnostic tool, and moved away a minimum of 9 inches
from the antenna, the antenna can be re-activated. For all installations labels must be placed