August 2001
Series 7000 Reader Reference Guide
20
Draft Document
FCC ID: A92RU1001A
5. The status of the inlay will be displayed in the status box at the lower part of the screen. If the
write was unsuccessful, the value in the memory location will change back to reflect the value
actually stored there.
6. To write protect a memory location, move the cursor to a memory location and click the "Set"
button in the Write Protect section. The memory location will change from a white background to
a gray background to show that it is now write protected.
7. To write to a block of memory locations, use the commands in the block section of the window.
Enter the starting memory location in the "From" window. Enter number of memory locations in
the "Length" window. The ending memory location will be automatically calculated in the "To:"
window. Click the box to the left of the "Write" text and enter the data in the window below the
"Write" command.
8. To write protect the entire block, click the box to the left of the "Write Protect" text.
9. To complete the block write command, select the "Perform" button.
10. To return to the List ID mode, click the "OK" button.
