Texas Instruments MSP430F663x, Manual

Page: 25 / 42

PRODUCTPREVIEW
MSP430F663x
www.ti.com SLAS566 – OCTOBER 2009
Universal Serial Communication Interface (USCI)
The USCI modules are used for serial data communication. The USCI module supports synchronous
communication protocols such as SPI (3 or 4 pin) and I
2
C, and asynchronous communication protocols such as
UART, enhanced UART with automatic baudrate detection, and IrDA. Each USCI module contains two portions,
A and B.
The USCI_An module provides support for SPI (3 or 4 pin), UART, enhanced UART, or IrDA.
The USCI_Bn module provides support for SPI (3 or 4 pin) or I2C.
The MSP430F663x series includes two complete USCI modules (n = 0 to 1).
Timer TA0
Timer TA0 is a 16-bit timer/counter (Timer_A type) with five capture/compare registers. It can support multiple
capture/compares, PWM outputs, and interval timing. It also has extensive interrupt capabilities. Interrupts may
be generated from the counter on overflow conditions and from each of the capture/compare registers.
Table 11. Timer TA0 Signal Connections
INPUT PIN NUMBER DEVICE MODULE MODULE DEVICE OUTPUT PIN NUMBER
MODULE
INPUT INPUT OUTPUT OUTPUT
BLOCK
PZ ZQW PZ ZQW
SIGNAL SIGNAL SIGNAL SIGNAL
34-P1.0 L5-P1.0 TA0CLK TACLK
ACLK ACLK
Timer NA NA
SMCLK SMCLK
34-P1.0 L5-P1.0 TA0CLK TACLK
35-P1.1 M5-P1.1 TA0.0 CCI0A 35-P1.1 M5-P1.1
DV
SS
CCI0B
CCR0 TA0 TA0.0
DV
SS
GND
DV
CC
V
CC
36-P1.2 J6-P1.2 TA0.1 CCI1A 36-P1.2 J6-P1.2
40-P1.6 J7-P1.6 TA0.1 CCI1B 40-P1.6 J7-P1.6
CCR1 TA1 TA0.1
ADC12_A (internal)
(1)
DV
SS
GND
ADC12SHSx = {1}
DV
CC
V
CC
37-P1.3 H6-P1.3 TA0.2 CCI2A 37-P1.3 H6-P1.3
41-P1.7 M7-P1.7 TA0.2 CCI2B 41-P1.7 M7-P1.7
CCR2 TA2 TA0.2
DV
SS
GND
DV
CC
V
CC
38-P1.4 M6-P1.4 TA0.3 CCI3A 38-P1.4 M6-P1.4
DV
SS
CCI3B
CCR3 TA3 TA0.3
DV
SS
GND
DV
CC
V
CC
39-P1.5 L6-P1.5 TA0.4 CCI4A 39-P1.5 L6-P1.5
DV
SS
CCI4B
CCR4 TA4 TA0.4
DV
SS
GND
DV
CC
V
CC
(1) Only on devices with peripheral module ADC12_A.
Copyright © 2009, Texas Instruments Incorporated
Submit Documentation Feedback 25
DRAFT ONL
Y