Evaluating with the ADCPro Software
20
SBAU140A – December 2008 – Revised February 2016
Copyright © 2008–2016, Texas Instruments Incorporated
MSOP-8EVM and MSOP-8EVM-PDK
7.1.4
Collecting Data
Once you have configured the ADSXXXXEVM device for your test scenario, pressing the ADCPro
Acquire
button starts the collection of the number of data points specified in the Test plug-in
Block Size
control.
The ADSXXXXEVM-PDK plug-in disables all the front panel controls while acquiring and displays a
progress bar, as shown in
.
Figure 17. Progress Bar While Collecting Data
For more information on testing ADCs in general and using ADCPro and Test plug-ins, refer to the
7.2
Troubleshooting
If ADCPro stops responding while the ADSXXXXEVM-PDK is connected, unplug the power supply from
the PDK. Unload and reload the plug-in before reapplying power to the PDK.
