8 Using I2C
The user can program the LMK1D1208I through the
software (available for download on ti.com).
This GUI allows the user to control the input enables, bank enable/mute controls, individual output enable, and
individual output amplitude.
From the TICS Pro toolbar located at the top, click
Select Device
→
Clock Distribution with Divider
→
LMK1D1208I
to access the profile.
Figure 8-1. Locate the LMK1D1208I Device Profile
Using the same toolbar, click
USB communications
→
Interface
→
USB2ANY
to switch from DemoMode to
I2C.
Figure 8-2. Set to I2C Communication
Using I2C
SNAU270 – FEBRUARY 2022
LMK1D1208IEVM User's Guide
9
Copyright © 2022 Texas Instruments Incorporated
