Texas Instruments LMK04832EVM-CVAL, User Manual

Page: 7 / 42

www.ti.com
Default TICS Pro Mode
7 SNAU252 – June 2020
Submit Documentation Feedback
Copyright © 2020, Texas Instruments Incorporated
LMK04832EVM-CVAL User’s Guide
Table 3. Integrated VCO PLL
(1)
(continued)
PARAMETER
LMK04832-SP
UNIT
VCO0 VCO1
Phase Detector Frequency 122.88 MHz
Frequency 2457.6 2949.12 MHz
Kvco 13.0 25.0 MHz/V
N 20 24
Phase Margin 68 71 degrees
Loop Bandwidth 210 326 kHz
4 Default TICS Pro Mode
TICS Pro saves the state of the selected LMK04832-SP device when exiting the software. To ensure a
common starting point, the following modes listed in
Table 4 may be restored by clicking Default
configuration and selecting the appropriate device configuration.
Table 4. Default TICS Pro Modes for the LMK04832-SP
DEFAULT TICS PRO MODE DEVICE MODE CLKin FREQUENCY OSCin FREQUENCY
CLKin1 122.88 MHz, OSCin 122.88 MHz, VCO1
2949.12 MHz
Dual PLL, Internal VCO 122.88 MHz 122.88 MHz
Figure 3. Selecting a Default Mode for the LMK04832-SP Device
5 Using TICS Pro to Program the LMK04832-SP
This section will demonstrate how to use TICS Pro. For more information on using TICS Pro, refer to
Appendix A . TICS Pro is available for download at http://www.ti.com/tool/ticspro-sw .
Before proceeding, be sure to follow the instructions in Section 2 to ensure proper hardware connections.
5.1 Start TICS Pro Application
Click Start → Programs → Texas Instruments → TICS Pro .
The TICS Pro program is installed by default to the Texas Instruments application group.
5.2 Select Device
Click Select Device → Clock Generator/Jitter Cleaner (Dual Loop) → LMK04832-SP .
Once started, TICS Pro will load the last used device. A recent history of used devices can be quickly
accessed under the
File Menu. To load a new device, click Select Device from the menu bar, select the
subgroup, then select the device to load.