Menus
5
Menus
Under the “File” menu the user can save and load contents of register map.
Under the “Tools” menu, the user can open “Direct Register Access” dialog, shown in
.
Figure 4. Direct Register access
The registers may read and write binary data. Use hexadecimal values in address and data fields. Correct
data value can also be created by setting and clearing individual bits. Value is immediately written to the
device by pressing the "Write" button, and read from the device by pressing the "Read" button. Next to
each bit is a description.
6
Using the Evaluation Hardware
Connectors are provided to allow a battery connection and output voltage measurement. Jumpers allow
selectable or USB controlled settings for device functions.
6.1
Power Supply
The evaluation board may be powered from a battery connector or from the USB interface.
Set jumper between J2 pin2 and TP27 to use supply from USB. Maximum current for USB supply is 500
mA.
Table 1. BATTERY CONNECTOR J2
Battery connector pins
Pin
Function
1
Battery (+) Terminal
2
GND
7
SNVU314 – January 2014
LM10524EVM User Guide
Copyright © 2014, Texas Instruments Incorporated