Texas Instruments LDC1000, User Manual, Page: 10 / 22

Data Streaming
www.ti.com
Figure 3-3. Register Settings
Double-click on a register in the table to read/write. If a register is read only, the selected register is read
immediately and the table value updated. If the register is read/write, a dialog pops up and the user can
set a new register value. If the value is not changed, it will default to a read.
Figure 3-4. Read/Write Register Dialog
Press “Read All” to refresh all configuration, status, and data.
Press “Restore Defaults” to write values from the default column (if they exist) to the current register value.
3.8 Data Streaming
Data is streamed from the EVM to the GUI when streaming is started. The sampling rate of the EVM and
the number of samples to plot can be configured. The sampling rate is the rate at which the micro-
controller on the EVM retrieves a measurement from the LDC10xx.
10 Inductive Sensing GUI User Guide SNAU150A – September 2013 – Revised March 2014
Submit Documentation Feedback
Copyright © 2013–2014, Texas Instruments Incorporated