Texas Instruments H.264 High Profile Encoder User Manual Download Page 84

Page: 84 / 139

API Reference

4-40

4.2.1.9

IVIDENC2_Inargs

║

Description

This structure defines the run time input arguments for an algorithm instance object.

║

Fields

Field

Data Type

Input/
Output

Description

size

XDAS_Int32

Input

Size of the basic or extended (if being used) data
structure in bytes.

inputID

XDAS_Int32

Input

Identifier to attach with the corresponding input
frames to be encoded.
Zero (0) is not a supported

inputID

. This value is

reserved for cases when there no input buffer is
provided.
This is useful when frames require buffering
(example, B frames) and to support buffer
management.
When there is no re-ordering,

IVIDENC2_OutArgs::outputID

will be the

same as this

inputID

field.

control

XDAS_Int32

Input

Encoder control operations, By this parameter various
control operations like forcing a frame to be SKIP can
be achieved, See

IVIDENC2_Control and

IH264HPVENC_Control

enumerations for more

details.

Summary of Contents for H.264 High Profile Encoder












































































































































Search results

Summary of Contents for H.264 High Profile Encoder

Reviews:

Related manuals for H.264 High Profile Encoder

Brands by name

Popular brands

Texas Instruments H.264 High Profile Encoder, User Manual

Search results

Summary of Contents for H.264 High Profile Encoder

Reviews:

Related manuals for H.264 High Profile Encoder

Brands by name

Popular brands