Texas Instruments H.264 High Profile Encoder User Manual Download Page 129

Page: 129 / 139

4-85

║

Name

algDeactivate()

– save all persistent data to non-scratch memory

║

Synopsis

Void algDeactivate(IALG_Handle handle);

║

Arguments

IALG_Handle handle; /* algorithm instance handle */

║

Return Value

Void

║

Description

algDeactivate()

saves any persistent information to non-scratch buffers using the persistent

memory that is part of the algorithm’s instance object.

The first (and only) argument to

algDeactivate()

is an algorithm instance handle. This handle is

used by the algorithm to identify various buffers that must be saved prior to next cycle of

algActivate()

and processing.

For more details, see

TMS320 DSP Algorithm Standard API Reference

(literature number

SPRU360).

║

See Also

algActivate()

Summary of Contents for H.264 High Profile Encoder












































































































































Search results

Summary of Contents for H.264 High Profile Encoder

Reviews:

Related manuals for H.264 High Profile Encoder

Brands by name

Popular brands

Texas Instruments H.264 High Profile Encoder, User Manual

Search results

Summary of Contents for H.264 High Profile Encoder

Reviews:

Related manuals for H.264 High Profile Encoder

Brands by name

Popular brands