FPC401 EVM GUI Description and Setup
10
SNLU222B – December 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
FPC401 and FPC402 Evaluation Module (EVM) User’s Guide
2.5
Input and Output Status and Configuration
To control the input, output, and GPIO pins, select the
I/O Status and Configuration
tab. The
Enable
Periodic Update
button will update the indicator of each input, GPIO, and output periodically set by the
Update Period (ms)
slider. This will also update the
Port's Aggregated Interrupt Flag
which determines if
any interrupt of the selected port has been triggered. To modify the state of the GPIOs, modify the
GPIO
0/1/2/3 Set
drop-down menus and click
SET GPIOS
. To modify the state of the outputs, modify the
OUT
A/B Set
drop-down menus and click
SET OUTPUTS
.
Figure 10. FPC401 GUI – Input, Output, GPIO Status, and Control
