DS90UB934-Q1
D
VP
O
u
tp
u
t
Parallel LVCMOS
Host / ISP
DS90UB933-Q1
Serializer
DS90UB933-Q1
Serializer
2
:1
Copyright © 2016, Texas Instruments Incorporated
General Description
3
SNLU220 – December 2016
Copyright © 2016, Texas Instruments Incorporated
Using the DS90UB934-Q1EVM Evaluation Module
1
General Description
1.1
Features
•
Supports 1-Megapixel sensors with HD 720P/800P/960P resolution at 30-Hz/60-Hz frame rate (paired
w/ DS90UB913A or DS90UB933)
•
Parallel LVCMOS Video Output
•
Supports Single-ended Coax cable and Power Over Coax
•
Adaptive receive equalization
•
Onboard USB2ANY Controller for I2C Access
•
I
2
C with Fast-mode Plus up to 1 Mbps
•
Flexible GPIOs for camera sync and functional safety
•
Single 12-V power supply for EVM
1.2
System Requirements
The major components of the DS90UB934-Q1EVM are:
•
DS90UB934-Q1
•
On-board POC interface
•
Two Fakra coax connectors for digital video, power, control, and diagnostics
•
On-board I
2
C programming interface
In order to demonstrate, the following is required (not included):
1. One Omnivision sensor board with DS90UB913A/DS90UB933 Serializer board
(a) TI DS90UB913A-CXEVM OR TI SAT0088 ‘MiniSer’, and
(b) OV10635 P/N: OV10635-EAAE-AA0A OR OV10640 P/N: OV10640-EAAA-AA0A (DVP)
2. One DACAR/FAKRA coax cables
3. Power supply for 12 V at 1 A
1.3
Contents of the Demo Evaluation Kit
•
One EVM board with the DS90UB934-Q1 (serializer board and cable not included)
1.4
Applications Diagram
Figure 1. Applications Diagram