Software Description
4
SNLU203A – February 2016 – Revised September 2019
Copyright © 2016–2019, Texas Instruments Incorporated
DS250DF410EVM User’s Guide
2
Software Description
2.1
Setup
The
one-time
procedure for installing the GUI software is as follows:
1. Download and install the TI SigCon Architect GUI. The steps for installing the software are as follows:
1. Go to
www.ti.com/tool/sigconarchitect
and download the latest version of SigCon Architect. At the
time this document was written, the latest version of SigCon Architect is 2.0.0.4.
Figure 2. Download SigCon Architect from www.ti.com
2. Extract the executable file (.EXE) from the downloaded file and run the executable.
3. Follow the installation wizard’s instructions to install SigCon Architect.
4. Request download link for the DS250DF410 profile file via "Special Note" link. Software access will
be granted with TI MySecure software access.
5. Extract the executable file (.EXE) from the downloaded file and run the executable.