Texas Instruments DRV82 2-EVM Series, User Manual

Page: 3 / 38

2 Jumpers Table and Setup
The jumpers J16-18 and J20 in the board are populated differently depending on which version of the board was
ordered This has done for simplicity's sake as you must simply populate all jumpers with jumper shunts.
Make sure to use jumper shunts to completely populate J4 and J8. J10 must be populated for there to be
communication with the EZFET. Use the following
Figure 2-1 to populate the following jumpers for all variants:
Figure 2-1. Jumper Population Guideline
Table 2-1. Jumper Identification Table
Description of jumper function and action if populated for different variants.
Jumpers DRV84X2 DRV89X2 DRV82X2
J5
VREF with C2K VREF with C2K VREF with C2K
J6
VREF with MSP430 VREF with MSP430 VREF with MSP430
www.ti.com Jumpers Table and Setup
SLOU558 – AUGUST 2022
Submit Document Feedback
DRV84x2_DRV82x2_DRV89x2-EVM User's Guide 3
Copyright © 2022 Texas Instruments Incorporated