Figure 5-7. Control Mode
Setting the starting, stopping, acceleration rate and target speed to the same value will start motor
directly at the target speed.
Figure 5-8. Input Based STEP Control Panel
e. Stall Detection: This feature can be enabled by using the “Initiate Stall” slide switch. While enabled,
all stall detection settings and features are revealed by the GUI. Stall detection can be used in either
learn mode which automatically learns the stall threshold value using a learn procedure or manual stall
threshold value entry mode by disabling the “Learn Mode”.
Figure 5-9. Stall Detection
GUI Operations DRV8462
20
DRV84x2_DRV82x2_DRV89x2-EVM User's Guide
Copyright © 2022 Texas Instruments Incorporated
