Getting Started
www.ti.com
6
SLOU403C – March 2015 – Revised June 2018
Submit Documentation Feedback
Copyright © 2015–2018, Texas Instruments Incorporated
DRV2700EVM High Voltage Piezo Driver Evaluation Kit
1
Getting Started
The DRV2700EVM is designed for flexible use for prototyping as well as evaluation.
Figure 1
shows the
names and locations of the various elements on the EVM. To power the board, connect the DRV2700EVM
to an available USB port on your computer using a mini-B USB cable. The default board settings cause
the microcontroller (MSP430) to control the inputs of the DRV2700 at power up. The MSP430 has each of
these control settings low which disables the DRV2700, by default.
Figure 1
shows the basic board
diagram of the DRV2700EVM.
Table 2
shows the original configuration of the jumpers, as shipped.
Figure 1. Board Diagram
1.1
Evaluation Module Operating Parameters
Table 1
lists the operating conditions for the DRV2700 on the evaluation module.
Table 1. Typical Operating Conditions
Parameter
Specification
Supply voltage range
3.6 V to 5.5 V
Power-supply current rating
500 mA
Input Voltage
0 V to V
DD
Max Output Voltage
200 Vpp
