Texas Instruments DLP5534Q1EVM, User Manual

Page: 7 / 12

www.ti.com
User Guide Overview
7 DLPU096 – November 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
DLP5534Q1EVM Evaluation Module User's Guide
1.2 Specifications
1.2.1 Electrical Specifications
(1)
Care must be taken to ensure that individual components and PCB do not exceed their maximum temperature when driving
high-power load. Force air cooling might be required to operate at high output current, high input voltage, and/or high duty
cycles.
(2)
Some components are only rated to 85°C. Refer to Table 7 for a list of these components.
Table 6. Electrical Specifications
PARAMETER MIN NOM MAX UNIT
Input
Voltage
(Input voltage must be higher than forward voltage of LED)
8 12 18 V
Illumination Driver Output Load
Voltage
(Per LED Color Output)
9 V
Current
(Per LED Color Output)
4 A RMS
Fan Output
Voltage 5 V
Current (total for all fans) 1 A
Temperature
Operating DMD Temperature
(1)
–40 105
(2)
°C
1.2.2 Component Temperature Ratings
The PCB materials and most of the PCB components are rated to operate between –40°C to 105°C,
including the DLP5534-Q1, the DLPC230-Q1, and the TPS99000-Q1.
Some components on PCBs, such as switches, connectors, and indicator LEDs, do not meet this
temperature rating. The specifications for EVM components which are not rated between –40°C to 105°C
are listed in
Table 7 . Please refer to the EVM bill of materials to review the temperature specifications of
all components used in the EVM design.
Table 7. EVM PCB Components Which are Not Rated for –40°C to 105°C
Board Reference Part Number Manufacturer Description
Temperature
Minimum (°C)
Temperature
Maximum (°C)
Controller D4, D5 LTST-C171KGKT Lite-On LED, GREEN 0805 –55 85
Controller D6 LTST-C171KRKT Lite-On LED, RED 0805 –55 85
Controller J3 685119248123 Wurth
CONN MICRO HDMI
RIGHT ANGLE
–40 85
Controller SW2 CVS-03TB Copal Electronics Inc
SWITCH DIP SLIDE 3-
POS 1 MM 6 V
–40 85
Controller SW1,SW3 CVS-01TB Copal Electronics Inc
SWITCH DIP SLIDE 1-
POS 1 MM 6 V
–40 85
Controller SW4 GT12MSABETR C&K Comp SWITCH, SPST, GULL –30 85
Controller
U5, U7,
U10, U503,
U504
PCMF2HDMI2SZ Nexperia
COMMON MODE
CHOKE 4LN SMD ESD
–40 85
Controller U501 TFP401AIPZPRQ1 Texas Instruments
IC PANELBUS DVI
RCVR 100-HTQFP
–40 85
The Controller and Illumination Driver PCBs have a UL flame rating of 130°C maximum.