Texas Instruments CDT370, User Manual

Page: 48 / 83

Memory Type Selection
4-4
4.3 Memory Type Selection
Once you have selected an action, select the type of memory you want to ac-
cess.
The dialog box looks like:
Figure 4–3. Select Memory Type Dialog Box
DEVICE PROGRAMMING
Data EEPROM start address : 1F00
Data EEPROM end address : 1FFF
Program EPROM start address : 6000
Program EPROM end address : 7FFF
Selected Action
<<Program Eprom>>
<Cancel>
<Data EEprom>
<Both Eprom + EEprom>
Warning:
1) Disconnect emulation cable from target system
2) Ensure target switches are set to ’EMU’ & install device in socket
3) Set all 3 switches on target connector to ’PROG’
You can apply the selected action (Program, Blank Check, Verify or Upload)
to:
-
the Program EPROM only,
-
the Data EEPROM only,
-
or Both EPROM and EEPROM.
Program EPROM is the default selection.