Texas Instruments CDT370, User Manual

Page: 45 / 83

Running Title—Attribute Reference
4-1 Chapter Title—Attribute Reference
Programming
With the debugger, it is possible to:
-
Program an EPROM device (FPM)
-
Program data EEPROM
-
Blank Check a device
-
Verify a device
-
Upload the contents of a device to RAM
These features use the emulator’s memory. First, you must configure the emu-
lator memory map to match the device you are emulating. Second, you must
load your code into the emulator’s memory in the same locations where the
code will ultimately reside on the device. For information on memory mapping,
please refer to Section 7.2,
Memory Mapping, and to Defining a Memory Map
in the TMS370 Family C Source Debugger User’s Guide.
Topic Page
4.1 Programming a Device (the P Command) 4-2
4.2 Action Selection 4-3
4.3 Memory Type Selection 4-4
4.4 Validation Dialog Box 4-5
4.5 Messages 4-6
Chapter 4