TI CDCE72010 Control GUI Interface
www.ti.com
Step 4: PFD and Charge Pump Selection
The PFD and Charge Pump section of the GUI can be clicked for a popup window that opens up. The
following illustration shows selections on the charge pump current and charge pump pulse width.
Step 5: Output Divider
The CDCE72010 has 10 outputs and 8 Output Dividers. Outputs 0 and 1 share the same divider, and
outputs 8 and 9 share the same divider. The Output Divider and the Output Phase Adjust are accessed by
clicking on the divider needed.
8
1.5-GHz Low-Phase Noise Clock Evaluation Board
SLAU250 – May 2008