![background image](http://html1.mh-extra.com/html/texas-instruments/cbl-2/cbl-2_getting-started-manual_1095239117.webp)
© 2000, 2003 T
EXAS
I
NSTRUMENTS
I
NCORPORATED
G
ETTING
S
TARTED WITH THE
CBL 2™ S
YSTEM
B-7
databegin
Results
0
Starts sending data at first point collected
1 to n
Starts sending data at the point selected
dataend
Results
0
Stops sending data at the last point
collected
1 to n
Stops sending data at the point selected
Note: dataselect=0, 1, 2; filtered if Filter=1-6 in Command 3. dataselect=3, 4, 5; ignore filter
setting in Command 3. Data End must be greater than or equal to Data Begin (unless Data
End=0) and both must be less than or equal to the number of samples sent to the CBL 2™ in
the last Command 3.
Command 6
System Setup
{6,
command
}
command
Results
0
Abort sampling
2
Abort sampling
3
Turns sampling sound off (default on
power-up)
4
Turns sampling sound on
{6,
command,parm
}
command
Results
5
parm
number you specify
Sets an ID number for the CBL 2 (used to
identify a specific CBL 2 when you have
multiple units linked together)
{6,
command,filter
}
command
Results
6
Applies new filter to existing data
filter
0
to 6
the number of the new filter to be applied