![background image](http://html1.mh-extra.com/html/texas-instruments/bq2014hevm-001/bq2014hevm-001_user-manual_1095281024.webp)
Starting the Program
8-2
8.1
Starting the Program
Run EV2200-xxH from the Start|Programs|EV2200-xxH menu sequence. The
software requests the PC communications port the first time it is run after
installation. Choose the Retry Auto-detection button for automatic port
configuration. After the port is detected, the software displays the bq2014H
data screen.
Figure 8–1. Initial Data Screen
The data screen may not show correct information until parameters in the soft-
ware are initialized.
8.2
Initialization
This section describes the settings that must be made before the EVM soft-
ware can properly display data.
8.2.1
Device Program Settings
Select the bq2014H option from the Options|Device Selection pulldown menu.
This sets the software to operate with the bq2014H. The program may prompt
to quit and restart the program. If so, follow the on-screen instructions and re-
start the program. Once restarted, the software should be set up to work with
the bq2014H.
8.2.2
HDQ Port
Note whether the HDQ line from the DM2014H is connected to SMBD/HDQ1
or SMBC/HDQ2 of the EV2200. Select HDQ1 for the SMBD/HDQ1 connection
or HDQ2 for the SMBC/HDQ2 connection from the Options|HDQ pulldown
menu.
8.2.3
Setup Parameters
Select the Setup tab.
Summary of Contents for bq2014HEVM-001
Page 1: ... May 2001 Advanced Analog Products User s Guide SLUU105 ...
Page 10: ...2 4 ...
Page 18: ...6 2 ...
Page 22: ...7 4 ...