Introduction
3
SLVUBH5 – October 2018
Copyright © 2018, Texas Instruments Incorporated
BOOSTXL-TPS65218 EVM User's Guide
Figure 1. BOOSTXL-TPS65218 Printed Circuit Board (Top View)
This procedure requires:
1. An MSP430F5529 LaunchPad development kit,
2. A USB A to micro B cable (included with the LaunchPad development kit)
3. A BOOSTXL-TPS65218 BoosterPack plug-in module
4. TPS65218D0 devices (TPS65218D0RSL)
5. An internet connection
Specific instructions on how to program the TPS65218D0 using the BOOSTXL-TPS65218 with the IPG-UI
software are provided in
, while the EVM documentation related to the design of the
BOOSTXL-TPS65218 hardware is provided in
NOTE:
All re-programmed EEPROM settings must be validated during prototyping phase to ensure
desired functionality because parts cannot be returned in case of incorrect programming. Any
issues should be reported to the
.
1.1
Related Documentation
Texas Instruments,
Integrated Power Management (PMIC) for ARM® Cortex™-A8/A9 SOCs and FPGAs data sheet
Texas Instruments,
