Stepper Motor Demo Application
Figure 8. Connect Target Selection
•
After the device connects, go to
Run
→
Load
→
Load Program
). Browse to the
BOOST-DRV8711 Hardware and Software Files
folder that was downloaded from the tool folder.
Go into the Application subdirectory and then go into the GUI subdirectory. Select the
appProgram.out
file (Application\BOOST-DRV8711_GUIvX.X\appProgram.out).
Figure 9. Load Program Selection
•
After a short delay, the appProgram.out file is loaded onto the MSP430G2553
•
Close CCS
5. Method 2: Flashing the project through CCS debugger
•
Open Code Composer Studio
•
Go to
File
→
Import
8
BOOST-DRV8711
SLVU967 – May 2014
Copyright © 2014, Texas Instruments Incorporated
