AMC7812EVM Hardware Overview
Figure 6. Typical Hardware Connections on the AMC7812EVM
4.3
Connecting the USB Cable to the SDM-USB-DIG
shows the typical response when connecting the SDM-USB-DIG platform to a USB port of a PC
for the first time. The PC usually responds with a
Found New Hardware, USB Device
popup dialog
window. The popup window then changes to
Found New Hardware, Virtual COM Port (CDC)
. This popup
indicates that the device is ready for use. The CDC driver is used for communication between the SDM-
USB-DIG and PC.
Figure 7. Confirmation of SDM-USB-DIG Platform Driver Installation
10
AMC7812EVM-PDK User’s Guide
SBAU177D – September 2010 – Revised August 2014
Copyright © 2010–2014, Texas Instruments Incorporated