Texas Instruments ADS42 EVM Series, User Manual

Page: 1 / 11

User's Guide
SLAU333 – March 2011
ADS42xx EVM
This is the user’s guide for the ADS42xx EVM (Revision B). The ADS42xx is a dual channel 12-bit/14-bit,
up to 250MSPS dual analog-to-digital converter family. This EVM is specifically suited for interfacing with
TI’s TSW1200 EVM to capture and display waveforms from the ADC. The EVM schematic, BOM, and
layout files can be found in the design package in the ADS42xx EVM product folder on www.ti.com.
Contents
1 Software Control
............................................................................................................
2
1.1 Installation Instructions
............................................................................................
2
1.2 Software Operation
................................................................................................
2
2 Basic Test Procedure
.......................................................................................................
5
2.1 Test Block Diagram
................................................................................................
5
2.2 Verify Board Set-up
................................................................................................
5
2.3 Test Set-up connections
..........................................................................................
6
2.4 TSW1200 Quick start Operation
.................................................................................
6
2.5 ADS42xx Test Procedure
.........................................................................................
7
2.6 ADS42xx Performance Results
..................................................................................
8
3 Optional Configurations
....................................................................................................
8
3.1 THS4509 Input Op-Amp Configuration
..........................................................................
8
3.2 On-Board CDC72010 Clock
......................................................................................
9
3.3 Parallel CMOS Output
.............................................................................................
9
List of Figures
1 ADS58C28_ADS42xx_GUI Front Panel – Top Level
..................................................................
3
2 ADS58C28_ADS42xx_GUI – Advanced Level
..........................................................................
4
3 Test Set-up Block Diagram
................................................................................................
5
4 TSW1200 GUI
...............................................................................................................
7
5 FFT Plot: 250 MHz Clock, 170 MHz Input
..............................................................................
8
List of Tables
1 Default ADS58C28/42xx EVM Rev B Jumper Setting for Serial Interface
..........................................
5
2 Parallel interface with pin control of ADS58C28/42xx EVM Rev B Jumper setting
................................
6
3 Jumper Setting for Transformer-Coupled or OPA-Driven Input
......................................................
8
4 Jumper Setting for Transformer-Coupled or CDC72010 Input
.......................................................
9
5 Jumper/Component Setting for DDR LVDS Output and Parallel CMOS Output
..................................
9
Windows is a registered trademark of Microsoft Corporation.
1 SLAU333 – March 2011 ADS42xx EVM
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated
This datasheet has been downloaded from http://www.digchip.com at this page