ADS1259EVM-PDK Operation
www.ti.com
space
Step 3.
Plug the ADS1259EVM into the MMB0 as
illustrates.
CAUTION
Do not misalign the pins when plugging the ADS1259EVM into the MMB0.
Check the pin alignment carefully before applying power to the PDK.
Figure 14. Connecting the ADS1259EVM to the MMB0
9.2.1
About the MMB0
The MMB0 is a Modular EVM System motherboard. It is designed around the
, a DSP
with an onboard USB interface from Texas Instruments. The MMB0 also has 16MB of SDRAM installed.
The MMB0 is not sold as a DSP development board, and it is not available separately. TI cannot offer
support for the MMB0 except as part of an EVM kit. For schematics or other information about the MMB0,
contact Texas Instruments.
16
ADS1259EVM, ADS1259EVM-PDK
SBAU163A – March 2010 – Revised April 2010
Copyright © 2010, Texas Instruments Incorporated
