8. In HSDC Pro, connect to the TSW14J58EVM and select
ADC32RF5x_4421_6G-8G
as the INI file shown in
Figure 4-2. ADC32RF5x_4421_6G-8G INI file
9. Update the firmware by pressing
Yes
on the pop-up window and waiting for the
Downloading Firmware
message to finish.
10. Open the Additional Device Parameters menu by clicking on the gear next to the ADC Output Data Rate
field.
11. Check the tickbox labeled "Enable?" and then enter the parameters shown in
.
Figure 4-3. Additional Device Parameters , 8x complex decimation
12. Once completed, press OK.
13. Check the tickbox labeled
Auto Calculation of Coherent Frequencies
and you will see the
ADC Input
Target Frequency
change from 790 M to the coherent frequency. Set the signal generator connected to
channel A input to this coherent frequency.
Quick Start Procedure for Complex Decimation Mode
SBAU377 – SEPTEMBER 2021
ADC32RF5xEVM User Guide
9
Copyright © 2021 Texas Instruments Incorporated
