14. Once completed, press OK.
15. Check the tickbox labeled
Auto Calculation of Coherent Frequencies
and the user will see the
ADC Input
Target Frequency
change from 1.003G to the coherent frequency. Set the signal generator connected to
the channel B input to this coherent frequency.
16. Change the view window from
Real FFT
to
Complex FFT
and select channel 3/4.
17. Press the
Capture
button. You should now see something similar to
18. Adjust signal generator output such that the measured fundamental power in HSDC Pro is at the user's
desired level.
Figure 4-8. 1003.002 MHz input, 128x complex decimation, 2x averaging, dither amplitude 3
Quick Start Procedure for Complex Decimation Mode
SBAU377 – SEPTEMBER 2021
ADC32RF5xEVM User Guide
13
Copyright © 2021 Texas Instruments Incorporated
