Quick Start Guide
7
SLAU630A – August 2015 – Revised August 2016
Copyright © 2015–2016, Texas Instruments Incorporated
ADC31JB68 Evaluation Module
2.3.2
HSDC Pro GUI Configuration
1. Open High Speed Data Converter Pro by going to
Start Menu
→
All Programs
→
Texas Instruments
→
High Speed Data Converter Pro
. The GUI main page looks as shown in
Figure 3. HSDC Pro GUI Main Panel
2. When prompted to select the capture board, select the TSW14J56EVM whose serial number
corresponds to the serial number on the TSW14J56EVM and click
OK
. This popup can be accessed
through the
Instrument Options
menu.
3. Select the
ADC
tab at the top of the GUI
4. Use the
Select ADC
drop-down menu at the top left corner to select
ADC31JB68EVM
5. When prompted to update the firmware for the ADC, click
Yes
and wait for the firmware to download to
the TSW14J56EVM
6. Enter “500M” into the
ADC Output Data Rate
field at the bottom left corner
7. Click
Capture
in HSDC Pro to capture data from the ADC