Texas Instruments 296-38528-ND, User Manual

Page: 15 / 24

www.ti.com
Bill of Materials, Layout, and Schematic
8 Bill of Materials, Layout, and Schematic
The bill of materials is provided in Table 4 . Section 8.2 shows the printed circuit board (PCB) layout for the
ADS8339EVM. Section 8.3 shows the schematic for the ADS8339EVM.
8.1 Bill of Materials
NOTE: All components should be compliant with the European Union Restriction on Use of
Hazardous Substances (RoHS) directive. Some part numbers may be either leaded or
RoHS. Verify that purchased components are RoHS-compliant. (For more information about
TI's position on RoHS compliance, refer to
www.ti.com .)
Table 4. ADS8339EVM Bill of Materials
Item No. Qty Value Ref Des Description Manufacturer Part Number
1 1 — Printed Circuit Board, 3.2 in x 1.7 In. x 0.062 Texas 6582556
in. Instruments
2 8 1 µF C1, C4, C7, C10, C15, Capacitor, X7R C/-10%, 25WV, 0603 Murata GRM188R71E105KA12D
C19, C22, C23
3 4 0.1 µF C2, C8, C11, C21 Capacitor, X7R C/-10%, 25WV, 0603 Murata GRM188R71E104KA01D
4 1 10000 pF C3 Capacitor, C0G C/-5%, 50WV, 0603 TDK C1608C0G1H103J
5 2 10 µF C6, C9 Capacitor, X7R C/-10%, 10WV, 0805 Murata GRM21BR71A106KE51L
6 3 — C12, C13, C14 Do Not Install (DNI) — —
7 2 10 µF C16, C18 Capacitor, X7R C/-10%, 16WV, 1206 TDK C3216X7R1C106K
8 2 1000 pF C17, C20 Capacitor, C0G C/-5%, 50WV, 0603 Murata GRM1885C1H102JA01D
9 2 — J1, J2 (Top) Header 20 Pin SMT Plug, .100" Gold (2x10) Samtec TSM-110-01-L-DV-P
10 2 — J1, J2 (Bottom) Header 20 Pin SMT Socket, .100" Gold (2x10) Samtec SSW-110-22-F-D-VS-K
11 1 — J3 (Top) Header 10 Pin SMT Plug, .100" Gold (2x5) Samtec TSM-105-01-L-DV-P
12 1 — J3 (Bottom) Header 10 Pin SMT Socket, .100" Gold (2x5) Samtec SSW-105-22-F-D-VS-K
13 1 — J4 CONN SMA JACK STRAIGHT PCB Amphenol 132134
14 2 — JP1, JP2 Header Strip, 3 pin .100" Gold (1x3) Samtec TSW-103-07-L-S
15 2 — JP3, JP4 Header Strip, 2 pin .100" Gold (1x2) Samtec TSW-102-07-L-S
16 7 — R1, R14, R15, R17, Do Not Install (DNI) — —
R27, R29, R30
17 2 1k R2, R3 Resistor, Metal Film Chip, 0.1%, 1/10W, 0603 Panasonic ERA-3AEB102V
18 1 100 R4 Resistor, Thick Film Chip, 1%, 1/10W, 0603 Panasonic ERJ-3EKF1000V
19 2 4.7 R5, R6 Resistor, Thick Film Chip, 1%, 1/10W, 0603 Vishay/Dale CRCW06034R70FKEA
20 2 0.22 R7, R10 Resistor, Thin Film Chip, 1%, 1/5W, 0603 Susumu RL0816S-R22-F
21 2 1k R8, R33 Resistor, Thick Film Chip, 1%, 1/10W, 0603 Panasonic ERJ-3EKF1001V
22 2 10 R9, R18 Resistor, Thick Film Chip, 1%, 1/10W, 0603 Vishay/Dale CRCW060310R0FKEA
23 3 20k R11, R12, R32 Resistor, Metal Film Chip, 0.1%, 1/10W, 0603 Panasonic ERA-3AEB203V
24 1 10k R13 Resistor, Metal Film Chip, 0.1%, 1/10W, 0603 Panasonic ERA-3AEB103V
25 4 0 R16, R21, R26, R28 Resistor, Thick Film Chip, 1/10W, 0603 Panasonic ERJ-3GEY0R00V
26 5 47 R19, R20, R22, R23, Resistor, Thick Film Chip, 1%, 1/10W, 0603 Panasonic ERJ-3EKF47R0V
R31
27 2 10k R24, R25 Resistor, Thick Film Chip, 1%, 1/10W, 0603 Panasonic ERJ-3EKF1002V
28 1 — U1 IC ADC 16BIT 1MSPS PSEUDO-DIFF 10- Texas ADS8339IDGS
MSOP Instruments
29 1 — U2 IC OPAMP VFB R-R 95MHZ SOT23-5 Texas THS4281DBV
Instruments
30 1 — U3 Do Not Install (DNI)
31 1 — U4 IC OPAMP VFB RRO 205MHZ SOT23-6 Texas OPA836IDBV
Instruments
32 1 — U5 IC VREF SERIES PREC 4.5V 8-MSOP Texas REF5045IDGK
Instruments
33 1 — U6 IC OPAMP GP 5.5MHZ SGL SOT23-5 Texas OPA376AIDBV
Instruments
34 1 — U7 IC EEPROM 256KBIT 400KHZ 8TSSOP Microchip 24LC256-I/ST
35 1 — U8 IC OPAMP CHOP R-R 350KHZ SOT23-5 Texas OPA333AIDBV
Instruments
15 SBAU233A – October 2014 – Revised November 2015 ADS8339EVM-PDK
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated