www.texas.dk
23
6.15.
Top speed adjustment bolt
This bolt controls the engine s revolutions/speed depending
on how far the bolt has been screwed in. This bolt can be
adjusted in accordance with the user s needs / abilities.
Adjustment procedure :
a: Screw the bolt clockwise and the power of the engine will
be decreased.
b: Screw the bolt anti-clockwise and the power of the engine
will be increased.
6.16.
Fuel tap
The fuel tap is placed between the fuel tank and the carburettor
The tap has three positions ON OFF RES.
ON (Arrow on fuel tap points vertical downwards): The fuel can
flow freely into the carburettor.
OFF (Arrow on fuel tap points horizontal): The fuel cannot
flow into the carburettor.
RES : (Arrow on fuel tap point vertical upwards) Extra tank.
6.17.
Idling adjustment bolt
This bolt is used to adjust the engine when idling.
1: Start engine and let it warm up in ten minutes.
2: Turn the adjustment bolt and thereby you adjust the number
of revolutions until the engine runs evenly and calmly.
Note !
The idle speed has been adjusted by your dealer.
Normally you should not carry this out yourself.
6.18.
Ignition switch
The switch has three positions OFF ON and the last position
which has no function.
OFF: The vehicle cannot start (key is turned to the left)
ON: The vehicle can start. (middle position)
Last position has no function.
