13
9. Rewinding the spool
Before any service and maintenance is done,
the power must be disconnected, it means the
battery removed from the tool.
See Fig. 7
The spool is supplied with the nylon line on it.
When need to rewind the spool with new nylon line,
follow these steps:
1. Press each side of cord housing. Remove lid.
2. Remove roll by pulling. Allow spring to remain on
spool. Remove any cord residue. Take 3-4 m of
cord (2.4 mm) and double it up.
3. Insert both ends into the 2 holes on the roll. Wind
cord onto roll in direction of arrow. Avoid twisting
cord. When twine is fully on roll, cut and insert the
two cut ends through the guide holes.
4. Assemble cord housing in reverse order, starting
with spring. Place cord in cord housing holes.
5. Re-place cover. Check cover is secure.
Always ensure trimmer head is secured tightly.
NEVER OVERFILL THE SPOOL WITH LINE!
10. Maintenance
Before any service and maintenance is done,
the power must be disconnected, it means the
battery removed from the tool.
•
Remove the battery before you clean and store the
machine.
•
Clean the housing and other parts with a soft brush
and a moist cloth. Never use aggressive cleansers
or solvents.
•
Prevent water from getting into the machine.
Lubrication of gear
The gear is lubricated from the factory, but for every
30-hour operation Grease MUST be refilled. Top up
with grease type: MULTIFAK EP-0 using a grease gun
(not included) on the lubrication nipple. See Fig 8.
11. Storage
Store the trimmer dry and unavailable for children. It is
recommended not to let it rest on the trimmer head.
Hang it on a wall in the handle.
12. Specifications
Model BCZ
5800
Battery type
Lithium Ion
Battery nominal voltage
58V
Battery rated voltage
50.4V
Motor power max
1700W (input power)
Cutting width
25/40 cm
Trimmer head
Dual line tap’ n go
Trimmer line diameter
2.4 mm
Net weight (tool only)
4.85 kg
13. Warranty terms and conditions
The warranty period is 2 years for private end users in
EU countries. Products sold for commercial use, only
have a warranty period of 1 year.
The warranty covers material and/or fabrication faults.
Restrictions and requirements
Normal wear and replacement of wearing parts are
NOT covered by the warranty.
Wearing parts, which are NOT covered for more than
12 months:
•
Trimmer head and spool
•
Nylon
line
•
Cutting guard and blade
•
Battery: If the battery is not stored correct (frost-
free and recharged every 3 months), the durability
is only guaranteed for 6 months.
The warranty does NOT cover damages/faults
caused by:
•
Lack of service and maintenance
•
Structural
changes
•
Exposure to unusual external conditions
•
If the machine has been improperly used or
overloaded
•
Use of unoriginal spare parts.
•
Other conditions where Texas cannot be held
responsible.
Whether a case is a warranty claim or not is
determined in each case by an authorized service
center. Your receipt is your warranty note, why it
should always be kept safe.
REMEMBER:
The purchase of spare parts as well as
any request for warranty repair, art. number (e.g.
900700XX), year and serial number should always be
informed.
* We reserve the right to change the conditions and
accept no liability for any misprints.