7
Figure 4
Assemble the support handle by pressing the handle (2)
onto the aluminum pole (1) and lock by inserting the lock
bolt and tighten until securely fastened.
Changing the nozzles
Figure 5
Push the nozzle onto the weed burner.
Always disconnect power and let cool down before
changing nozzles!
Operation
.
Use the electric weed burner to burn weeds between
flagstones and tiles.
Adjust the support handle, so you have the best possible
control of the machine
Activate the ON/OFF trigger on the weed burner handle
with the fingers (figure 1,2), Release to stop.
First time the machine is being used, a faint odour may be
released. This is not harmful and will disappear after using
the machine for a while.
It can take up to 5 minutes before the weed burner reaches
its maximum temperature.
The weed burner is most suitable for plants with a high sap
content. The best time to burn weed is during spring. It is
most effective to use the weed burner in the early stage of
a plants growth. Note, that the result is not immediately
visible, it can take several days before the plant dries out.
Plants with soft-leaved seedlings are most sensitive and
requires often only one treatment. Older plants with hard
leaves will require more treatments every 1-2 weeks before
dries out.
The burn time varies depending on the weed type. The
bigger and stronger it is, the longer time is needed. To get
the best result, it cannot be burned too little or too much. It
is recommended to try different treatments between 5-20
seconds.
When taking breaks, let the machine rest on the support
brace.
Do not press the nozzle down onto the surface. This will
cause deformation of nozzles, and may limit heath
discharge, causing meltdown of the product. Extension
cords longer than 15 m must not be coiled, but must be
rolled out, lying loosely on the ground.
The performance may decrease if long extension cars
(above 25 m) is being used.
Storage
Clean the machine after use. Make sure no debris gets in
through the cooling slots of the motor housing and heat
blower. Store the cleaner in a frost free area, out of reach
of children.
Specifications
TYPE
Electric Weed burner WB600
Voltage (V)
230 ~50 Hz
Output (Watt)
Max 2000W
Temperatur (°C)
Max 650
Protection class
II
Weight (kg)
2
