8. Maintenance
The round brushes and the steering unit should be cleaned using water. All bearings are
dust proof. Never use high pressure cleaning.
Gear parts should be sprayed with special Texas lubrication spray part no : 92300. If you
are in doubt contact your Texas dealer.
Only use original spare parts
Part
After each use
Screws / bolts
Check / Tighten
X
Belt Check
X -
Replace if necessary
9. Storage
Clean the machine after each use.
When the machine is not used for a period all metal parts should be coated with a thin
layer of oil to prevent corrosion.
Store the machine in a dry place and vertical if possible. This is done by placing the
machine on the waste box or hanging it from the handle with the top of the mashine
against the wall. In this way the brushes are not bend.
10. Trouble shooting
Problem Reason Solution
The brushes do not rotate
Belt is too slack or defective Replace the belt
Violent vibrations
Srews are loose
Tighten all screws
Adjustment of brushes difficult Blockage due to dirt
Clean
For all other problems you should see your local Texas dealer.
8
