10.2.2 Connection via USB (Optional)
In order to connect via USB, you must use the USB cable provided or, if
necessary, cables on which "
USB HIGH SPEED
is specifically indicated.
1.
NAVIGATOR
2.
USB cable
3.
PC
Proceed as follows:
1.
Connect the USB cable's device connector to the tool's USB socket.
2.
Connect the USB cable's host connector to a USB port on the display unit.
3.
Continue with the communication software configuration.
The configuration procedure is described in the software manual.
The flashing of the
RED LED
indicates a proper communication between the
tool
and the
display unit
.
You cannot power the tool using the USB port.
29
en
